High temperature camera housing

High temperature camera housing introduction

High temperature camera housing is designed for high temperature environment and it can allow you to install camera inside. We have three model high temperature enclosure.

  • Using Peltier inside. it can up 100 degree.
  • Using air cooling. It have dual layer which can allow air to cooling.
  • Water cooling. If temperature above 150 centigrade, we suggest to water cooling instead of air cooling.

High-temp camera enclosure details

Ingress Protection  levelIP66
Max Temperature of Windows≤200℃
the maxium Cooling water flow0.82 m3/h
the working cooling water pressure>0.25Mpa
the maxium Cooling water pressure0.6Mpa
Air pressure≥0.4Mpa
air flow rate10.5L/Min
Relative  humidity≤95%(+25°C)
Atmospheric  pressure:80kpa~106 kpa
Supply voltageDC12V /AC220V   optional
Material304 stainless steel
inlet interface specificationsG1/4 for air and water cooling, G1/2″ x 2  for output cable
External  dimensions 351.5x140x182.5mm
inside dimensionΦ100mm*300mm(length )
Windows areaΦ60
Installation  MethodPTZ , Wall Hanging dyadic , fixed bracket ,


click to send us email

Welcome to send us email. We’ll reply you as soon as possible.
Looking forward to cooperating with you!!!!


General Inquiry: [email protected]
Sales Email: [email protected]
Technical: [email protected]
Purchasing:[email protected]